10911355

View detailed technical data, stock status, and sourcing information for: 10911355
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 10911355 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-178-0077

Item Name Code

16900

Assigment Date

02/26/1969 (57 years ago)

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

2.000 inches nominal second leg length, 9.880 inches nominal second leg width, 8.875 inches nominal second leg distance between upper hole centers along width, 0.690 inches nominal first leg length, 0.500 inches nominal second leg corner radius

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

First Leg Length: 0.690 inches nominal
Second Leg Length: 2.000 inches nominal
Second Leg Width: 9.880 inches nominal
Second Leg Corner Radius: 0.500 inches nominal
Second Leg Distance Between Upper Hole Centers Along Width: 8.875 inches nominal
Second Leg Distance Between Lower Hole Centers Along Width: 6.188 inches nominal
Second Leg Distance Between Hole Centers Along Length: 0.750 inches nominal
Second Leg Distance Between First And Second Hole Centers Along Width: 1.344 inches nominal
Second Leg Distance From Edge To Hole Center Along Width: 0.500 inches nominal
Second Leg Distance From Edge To Hole Center Along Length: 0.370 inches nominal
First Leg Thickness: 0.188 inches nominal
Second Leg Thickness: 0.188 inches nominal
First Leg Width: 9.880 inches nominal
First Leg Style: square
First Leg Hole Arrangement Style: no hole
Second Leg Style: corner radius
Second Leg Hole Arrangement Style: four holes
Second Leg Relationship To First Leg: not identical
First Leg Angle: 90.0 degrees nominal
Material: aluminum alloy 6061 or aluminum alloy 6062
Material Document And Classification: qq-a-200/8 fed spec single material response
Style Designator: angle

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10911355	Angle Bracket
5340001780077	Angle Bracket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-178-0077?

The FSCG of the NSN 5340-00-178-0077 is 5340

Does the NSN 5340-00-178-0077 have a Schedule B code assigned?

Yes, the Schedule B code is 8302500000

Does NSN 5340-00-178-0077 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-178-0077 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-178-0077 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-178-0077 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Wed, Feb 26, 1969