3P50004-181

View detailed technical data, stock status, and sourcing information for: 3P50004-181
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 3P50004-181 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-075-4903

Item Name Code

20354

Assigment Date

01/01/1963 (63 years ago)

A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which may be less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also bracket, angle and bracket (1), mounting.

stamped fabrication method, 0.709 inches minimum and 0.791 inches maximum first leg length, 0.276 inches minimum and 0.286 inches maximum first leg hole diameter, plain mounting hole type, 0.709 inches minimum and 0.791 inches maximum second leg length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Fabrication Method: stamped
Mounting Hole Type: plain
First Leg Length: 0.709 inches minimum and 0.791 inches maximum
Second Leg Length: 0.709 inches minimum and 0.791 inches maximum
First Leg Hole Diameter: 0.276 inches minimum and 0.286 inches maximum
Second Leg Hole Diameter: 0.214 inches minimum and 0.224 inches maximum
Second Leg Distance From Edge To Hole Center Along Width: 0.219 inches minimum and 0.281 inches maximum
Second Leg Distance From Edge To Hole Center Along Length: 0.219 inches minimum and 0.281 inches maximum
First Leg Thickness: 0.045 inches minimum and 0.055 inches maximum
Second Leg Thickness: 0.045 inches minimum and 0.055 inches maximum
Center Section Thickness: 0.045 inches minimum and 0.055 inches maximum
First Leg Width: 1.919 inches minimum and 1.981 inches maximum
First Leg Corner Radius: 0.219 inches minimum and 0.281 inches maximum
First Leg Distance Between Hole Centers Along Width: 1.700 inches nominal
First Leg Distance From Edge To Hole Center Along Width: 0.219 inches minimum and 0.281 inches maximum
First Leg Distance From Edge To Hole Center Along Length: 0.219 inches minimum and 0.281 inches maximum
Second Leg End Radius: 0.219 inches minimum and 0.281 inches maximum
First Leg Style: corner radius
First Leg Hole Arrangement Style: two holes
Second Leg Style: end radius and tapered
Second Leg Hole Arrangement Style: one hole
Second Leg Relationship To First Leg: not identical
Material: steel
Material Document And Classification: ams2400 assn std single material response
Surface Treatment: cadmium
Surface Treatment Document And Classification: ams 2400 assn std single treatment response
Style Designator: double angle

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
3P50004-181	Double Angle Bracket
3P5004-181	Double Angle Bracket
487996	Double Angle Bracket

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-075-4903?

The FSCG of the NSN 5340-00-075-4903 is 5340

Does NSN 5340-00-075-4903 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 5340-00-075-4903 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-075-4903 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-075-4903 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963