MS3117-11BC

View detailed technical data, stock status, and sourcing information for: MS3117-11BC
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part MS3117-11BC to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5970 Electrical Insulators and Insulating Materials

National Stock Number

5970-01-282-4177

Item Name Code

61626

Assigment Date

07/15/1988 (38 years ago)

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

-55.0 celsius and 135.0 celsius temp rating, 0.920 inches nominal as supplied main body small end inside diameter, 0.050 inches nominal after unrestricted recovery small end wall thickness of main body, 0.220 inches nominal after unrestricted recovery main body small end inside diameter, 0.050 inches nominal after unrestricted recovery large end wall thickness of main body

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Temp Rating: -55.0 celsius and 135.0 celsius
Large End Wall Thickness Of Main Body: 0.050 inches nominal after unrestricted recovery
Small End Wall Thickness Of Main Body: 0.050 inches nominal after unrestricted recovery
Main Body Small End Inside Diameter: 0.220 inches nominal after unrestricted recovery
Main Body Small End Inside Diameter: 0.920 inches nominal as supplied
Main Body Large End Inside Diameter: 0.410 inches nominal after unrestricted recovery
Main Body Large End Inside Diameter: 0.920 inches nominal as supplied
Angle Between Large End And Small End Centerlines In Deg: 90.0 nominal after unrestricted recovery
Special Features: inside adhesive coated; white color stripe; large end has lip
Flexibility: semirigid
Height: 0.890 inches nominal after unrestricted recovery
Color: black
Material: plastic cross-linked polyolefin
Material Document And Classification: mil-i-81765/1,type 1 mil spec single material response
Style Designator: boot-90 degrees

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
MS3117-11BC	S Electrical Insulation Sleeving
SAE AS85049/141-11AC	S Electrical Insulation Sleeving

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5970-01-282-4177?

The FSCG of the NSN 5970-01-282-4177 is 5970

Does the NSN 5970-01-282-4177 have a Schedule B code assigned?

Yes, the Schedule B code is 8546900000

Does NSN 5970-01-282-4177 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5970-01-282-4177 contain precious materials?

Item does not contain precious metal.

Does NSN 5970-01-282-4177 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5970-01-282-4177 was assigned to the Federal Catalog?

It was assigned 38 years ago, on Fri, Jul 15, 1988