1242-0213

View detailed technical data, stock status, and sourcing information for: 1242-0213
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 1242-0213 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5970 Electrical Insulators and Insulating Materials

National Stock Number

5970-01-181-3060

Item Name Code

61626

Assigment Date

06/08/1984 (42 years ago)

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

corrosion resistant and flame resistant and mildew resistant and solvent resistant and water resistant environmental protection, 0.040 inches nominal after unrestricted recovery main body wall thickness, -55.0 celsius and 225.0 celsius temp rating, 0.340 inches maximum after unrestricted recovery main body small end inside diameter, 2.100 inches nominal after unrestricted recovery main body overall length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Temp Rating: -55.0 celsius and 225.0 celsius
Environmental Protection: corrosion resistant and flame resistant and mildew resistant and solvent resistant and water resistant
Main Body Wall Thickness: 0.040 inches nominal after unrestricted recovery
Main Body Overall Length: 2.100 inches nominal after unrestricted recovery
Main Body Small End Inside Diameter: 0.340 inches maximum after unrestricted recovery
Main Body Small End Inside Diameter: 1.350 inches minimum as supplied
Distance From Bottom Of Shoulder To Large End Of Main Body: 1.120 inches nominal after unrestricted recovery
Minimum Tensile Strength: 1500 pounds per square inch
Special Features: inside coated with s-1017 adhesive
Flexibility: semirigid
Color: black
Material: plastic polyolefin
Material Document And Classification: rt-301, raychem corp mfr ref single material response
Dielectric Material Voltage Rating Per Unit Thickness: 200.0 volts per mil /0.001 inch/

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
1242-0213	S Electrical Insulation Sleeving
1501-2-B7WM250	S Electrical Insulation Sleeving
214A342-3/42	S Electrical Insulation Sleeving
GB806Y4-3A	S Electrical Insulation Sleeving

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5970-01-181-3060?

The FSCG of the NSN 5970-01-181-3060 is 5970

Does the NSN 5970-01-181-3060 have a Schedule B code assigned?

Yes, the Schedule B code is 8546900000

Does NSN 5970-01-181-3060 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5970-01-181-3060 contain precious materials?

Item does not contain precious metal.

Does NSN 5970-01-181-3060 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5970-01-181-3060 was assigned to the Federal Catalog?

It was assigned 42 years ago, on Fri, Jun 8, 1984