691041-1

View detailed technical data, stock status, and sourcing information for: 691041-1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 691041-1 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5970 Electrical Insulators and Insulating Materials

National Stock Number

5970-01-147-4480

Item Name Code

18296

Assigment Date

02/16/1983 (43 years ago)

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

25.0 chamfer angle in deg, 0.687 inches nominal overall width, 0.075 inches minimum and 0.080 inches maximum first hole diameter, 1.130 inches nominal overall length, 0.038 inches minimum and 0.042 inches maximum overall height

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Chamfer Angle In Deg: 25.0
Overall Length: 1.130 inches nominal
Overall Height: 0.038 inches minimum and 0.042 inches maximum
Overall Width: 0.687 inches nominal
First Hole Diameter: 0.075 inches minimum and 0.080 inches maximum
Chamfer Depth: 0.150 inches nominal
First Hole Spacing: 0.050 inches nominal
Second Hole Spacing: 0.100 inches nominal
Special Features: item has 28 holes,2nd chamfer is 22.0 degrees,0.060 in deep,end opposite chamfers has cutout 0.247 in l,0.135 in min,0.155 in max deep
Material And Location: unable to decode
Style Designator: flat, irregular

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
691041-0001	Plate Insulator
691041-1	Plate Insulator

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5970-01-147-4480?

The FSCG of the NSN 5970-01-147-4480 is 5970

Does the NSN 5970-01-147-4480 have a Schedule B code assigned?

Yes, the Schedule B code is 8546900000

Does NSN 5970-01-147-4480 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5970-01-147-4480 contain precious materials?

Item does not contain precious metal.

Does NSN 5970-01-147-4480 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5970-01-147-4480 was assigned to the Federal Catalog?

It was assigned 43 years ago, on Wed, Feb 16, 1983