MS27514-17E

View detailed technical data, stock status, and sourcing information for: MS27514-17E
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part MS27514-17E to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5935 Electrical Connectors

National Stock Number

5935-01-314-7594

Item Name Code

51281

Assigment Date

02/05/1990 (36 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.125 inches minimum and 0.142 inches maximum nut height, 2b thread class, 0.059 inches nominal drilled hole diameter, 3 drilled hole type and quantity, right-hand thread direction

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 2b
Thread Direction: right-hand
Nut Height: 0.125 inches minimum and 0.142 inches maximum
Drilled Hole Diameter: 0.059 inches nominal
Hole Type And Quantity: 3 drilled
Width Across Flats: 1.422 inches minimum and 1.455 inches maximum
Thread Series: unef
Thread Quantity Per Inch: 18
Nominal Thread Size: 1.250 inches
Hole Configuration Style: configuration b
Material: steel comp 303 or steel comp 303se overall
Material Document And Classification: astm a582 assn std all material responses overall
Surface Treatment: passivate overall
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
MS27514-17E	Electrical Connecto Coupling Nut
MS3186C116P	Electrical Connecto Coupling Nut

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5935-01-314-7594?

The FSCG of the NSN 5935-01-314-7594 is 5935

Does NSN 5935-01-314-7594 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5935-01-314-7594 contain precious materials?

Item does not contain precious metal.

Does NSN 5935-01-314-7594 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5935-01-314-7594 was assigned to the Federal Catalog?

It was assigned 36 years ago, on Mon, Feb 5, 1990