01-812-5

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside_diameter_or_smallest_overall_outside_dimension_is_designated_as_a_tolerance/dimension_the_maximum_dimension_will_be_used_to_determine_compliance._excludes:gasket;_insulator_(as_modified)_and_mounting_pad,_electrical-electronic_component.____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

55 oz blender bag; sterile; contains a third layer of perforated polyethylene to separate liquids and solids for easy pipetting of sample; filter is sealed into the sides and bottom of the bag, allowing sample to be placed on either side; hole diameter: 0.013 in; number of holes per square in: 1840; should not be used at temperatures above 180 deg f (82 deg c); can be frozen to any temperature; dimensions: 7.5 in w, 12 in l; 4.0 mil thick; package of 250 special features, bag blender whirl pak 55oz 250s part name assigned by controlling agency, unable to decode material and location, looped/twisted wire closure fastening type, top opening location