C0720-055-1250M

View detailed technical data, stock status, and sourcing information for: C0720-055-1250M
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part C0720-055-1250M to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5360 Coil, Flat, Leaf and Wire Springs

National Stock Number

5360-00-196-4514

Item Name Code

04226

Assigment Date

06/26/1970 (56 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.250 inches nominal spring free length, spring end,squared and ground both ends end style, 0.281 inches nominal spring solid length, 0.612 inches nominal inside diameter, 10.000 pounds nominal load rating

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Inside Diameter: 0.612 inches nominal
End Style: spring end,squared and ground both ends
Spring Free Length: 1.250 inches nominal
Load Rating: 10.000 pounds nominal
Spring Solid Length: 0.281 inches nominal
Spring Solid Outside Diameter: 0.720 inches nominal
Coil Helix Direction: right-hand
Spring Deflection Rate: 15.000 pounds per inch nominal
Spring Free Outside Diameter: 0.720 inches nominal
Spring Length Under Load: 0.580 inches nominal
Material: steel uns k08500 overall
Material Document And Classification: qq-w-470 fed spec single material response overall
Style Designator: cylindrical

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10667993-001	Compression Helical Spring
12477958	Compression Helical Spring
C0720-055-1250M	Compression Helical Spring
D100599PT3	Compression Helical Spring
LC 055J 04 M	Compression Helical Spring

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5360-00-196-4514?

The FSCG of the NSN 5360-00-196-4514 is 5360

Does the NSN 5360-00-196-4514 have a Schedule B code assigned?

Yes, the Schedule B code is 7320205000

Does NSN 5360-00-196-4514 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5360-00-196-4514 contain precious materials?

Item does not contain precious metal.

Does NSN 5360-00-196-4514 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5360-00-196-4514 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Fri, Jun 26, 1970