5910-01-364-1947

Find complete technical information, availability, and procurement data for: 5910-01-364-1947
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5910-01-364-1947 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5910 Capacitors

National Stock Number

5910-01-364-1947

Item Name Code

00007

Assigment Date

09/14/1992 (33 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

established reliability indicator, dual inline body style, 0.010 reliability failure rate level in percent, 0.086 inches minimum and 0.098 inches maximum body length, 0.120 inches minimum and 0.176 inches maximum terminal length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Body Style: dual inline
Reliability Indicator: established
Reliability Failure Rate Level In Percent: 0.010
Terminal Length: 0.120 inches minimum and 0.176 inches maximum
Body Length: 0.086 inches minimum and 0.098 inches maximum
Body Width: 0.240 inches minimum and 0.280 inches maximum
Body Height: 0.121 inches minimum and 0.135 inches maximum
Center To Center Distance Between Terminals Parallel To Width: 0.290 inches minimum and 0.360 inches maximum
Schematic Diagram Designator: no common or grounded electrode(s)
Insulation Resistance At Maximum Operating Temp: 10000.0 megohms
Capacitance Value Per Section: 330.000 picofarads single section
Nonderated Operating Temp: -55.0 celsius minimum and 125.0 celsius maximum
Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius: 0.0 single section
Nonderated Continuous Voltage Rating And Type Per Section: 200.0 dc single section
Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius: -30.0 to 30.0 single section
Tolerance Range Per Section: -2.00 to 2.00 percent single section
Insulation Resistance At Reference Temp: 100000.0 megohms
Dissipation Factor At Reference Temp In Percent: 2.500
Terminal Surface Treatment: solder
Material: plastic case
Test Data Document: "81349-mil-c-39014 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Terminal Type And Quantity: 2 printed circuit
Specification/Standard Data: 81349-mil-c-39014/22 government specification

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5910-01-364-1947?

The FSCG of the NSN 5910-01-364-1947 is 5910

Does the NSN 5910-01-364-1947 have a Schedule B code assigned?

Yes, the Schedule B code is 8532290040

Does NSN 5910-01-364-1947 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5910-01-364-1947 contain precious materials?

Item does not contain precious metal.

Does NSN 5910-01-364-1947 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5910-01-364-1947 was assigned to the Federal Catalog?

It was assigned 33 years ago, on Mon, Sep 14, 1992