5995-01-601-9711

Find complete technical information, availability, and procurement data for: 5995-01-601-9711
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5995-01-601-9711 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5995 Wire Assemblies: Communication Equipment, Cord and Cable

National Stock Number

5995-01-601-9711

Item Name Code

00782

Assigment Date

01/26/2012 (14 years ago)

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

180.00 inches overall length, pin all ends all conductors termination type, -40.0 celsius and 68.0 celsius temp rating, 37 conductor quantity, threat emitter end item identification

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 180.00 inches
Temp Rating: -40.0 celsius and 68.0 celsius
End Item Identification: threat emitter
Termination Type: pin all ends all conductors
Conductor Quantity: 37
Part Name Assigned By Controlling Agency: "cable,ethernet-rs422,180""
Special Features: item is a cable made up of 7 bundles of 2 twisted pair cables that have a drain wire, aluminum foil shield, and a jacket over the 2 twisted pairs; the 7 bundles have 2 tinned copper braid shields covered with an overall jacket; the twisted pair bundles shall be capable of meeting ethernet cat 5e requirements and support a minimum of 100 m-bit full duplex communications
Special Markings: the unit shall be permanently and legibly marked iaw mil-std-130 (manufacturer's cage code & part number) per sae-as478 method 30, method 3b or method 15
Special Test Features: "cable shall be designed to withstand storage temperatures of -40c to 68c without suffering degradation and loss of operation;cable jacket shall be designed to withstand the effects of solar loading per mil-std-810 method 505.5 (1120 w/m2) without damaging degradation resulting in loss of performance;cable shall be able to withstand effects of wind driven rain at a rate of 2" per hour and a wind velocity of 30 knots at any orientation encountered and capable of sitting in standing water for extended periods without degradation or loss of performance; connectors will not be subjected to standing water;cable shall withstand effects of blowing sand and dust at a wind velocity of 35mph;cable shall be designed to resist effects of salt spray environment,fungus, birds and insects"
Supplementary Features: insulated 22-24 guage wire shall be stranded tinned copper; drain wire shall be 22-26 gauge stranded tinned copper; the 2 pair shield shall provide 100% coverage; overall shields shall be tinned copper braid providing 85% coverage with 1 shield and approximately 95% coverage with the 2nd shield;nominal impedence of pairs: 100 ohms