5995-01-462-6416

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

cable assembly consists of 2 connector elec rf p/n m39012/16-0503 material spec mil-c-39012/16 remark: 50 ohm,ser-bnc,plug,pin, 8.0 ft cable rf 50 ohms p/n m17/175-00001 material specification m17/175 remark: 50 ohms,.195 od,..38 ctr, 3 strap plastic ident p/n ms336b-4-9d remark 3 strap tie, color-natural, wiring shall comply with installation requirements of mil-w-5088, crimp contacts shall meet the tensile and electrical requirements of mil-c-22520, hot stamp marking per mil-m-81594 color white .12 inch high minimum, assembly shall be tested for insulation breakdown at 500vdc or vac (5 sec max) between all terminals that are not common and between terminals and connector shell, the leakage resistance at the test voltage shall be greater than 10 megohms special features, cable assembly, radi end item identification, cable assembly, walleye/bombs adptr e fuse -cable-w5 part name assigned by controlling agency