8040-01-685-5358

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside_diameter_or_smallest_overall_outside_dimension_is_designated_as_a_tolerance/dimension_the_maximum_dimension_will_be_used_to_determine_compliance._excludes:gasket;_insulator_(as_modified)_and_mounting_pad,_electrical-electronic_component.____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

rtv167 polydimethyl siloxane sealant part name assigned by controlling agency, 2.80 ounces quantity within each unit package, paste physical form, 63.00 volatile organic compound in grams per liter, physical form: solid paste; color: gray; sweet odor; evaporation rate: <1.00; vapor pressure: negligible; density: 1.11 g/cm3; relative density: 1.11; insoluble; viscosity: >20.5 mm2/s; voc: 63.00 g/l; hazardous polymerization will not occur; incompatible materials: water, strong acids and bases; hazardous decomposition products: carbon dioxide, silicon dioxide, formaldehyde; special features